click below
click below
Normal Size Small Size show me how
USAG L4 Beam
Level 4 - Beam
Question | Answer |
---|---|
front support fish pose mount (value of element) | 0.20 |
failure to extend body in front support (mount) | ^0.10 |
lack of continuity from the mount to stand (mount) | ^0.10 |
performing a knee scale (mount) | 0.30 |
cartwheel (value of element) | 0.60 |
incorrect (simultaneous) hand placement (cartwheel) | 0.10 |
failure to pass through vertical (cartwheel) | ^0.30 |
1/2 (180*) turn in forward passé (value of element) | 0.40 |
leg in incorrect position (1/2 turn) | 0.10 (not in forward passé) |
use of heel-snap turn technique (1/2 turn) | 0.30 |
stretch jump (value of element | 0.20 |
failure to land on both feet simultaneously (stretch jump) | 0.10 |
failure to land with feet closed (stretch jump) | ^0.10 |
insufficient continuity b/t stretch jump and split jump (jumps) | no deduction |
connection broken b/t stretch jump and split jump (jumps) | 0.05 |
split jump - 120* (value of element) | 0.40 |
uneven leg separation (split jump) | ^0.20 |
failure to land on both feet simultaneously (split jump) | 0.10 |
failure to land with feet closed (split jump) | ^0.10 |
cross handstand (value of element) | 0.60 |
failure to join (close) legs (cross handstand) | 0.10 (close - side by side) |
incorrect (staggered) hand placement (cross handstand) | 0.10 |
failure to attain vertical (cross handstand) | ^0.30 |
failure to hold one second (cross handstand) | ^0.10 |
scale (horizontal) (value of element) | 0.40 |
failure to lift free leg to a minimum of horz in scale (scale) | ^0.20 |
failure to hold one second (scale) | ^0.10 |
straight leg leap - 120* (value of element) | 0.60 |
bending lead (front) leg on take-off (leap) | ^0.10 |
uneven leg separation (leap) | ^0.20 |
failure to pause in low arabesque position on landing (leap) | 0.05 |
cartwheel to side handstand, 1/4 (90*) turn, dismount (value of element) | 0.60 |
incorrect (simultaneous) hand placement (dismount) | 0.10 |
failure to attain vertical (dismount) | ^0.30 |
failure to hold one second (dismount) | ^0.10 |
failure to perform 1/4 (90*) turn (dismount) | 0.20 |
1/4 (90*) turn incomplete or overturned (dismount) | ^0.10 |
failure to maintain hand contact until the body passes by the horz plane of the beam (dismount) | ^0.10 |
failure to complete dismount (dismount) | ^0.60 (incomplete element) ^0.30 failure to attain vertical +0.10 failure to hold one second +0.20 failure to perform 1/4 (90*) turn +0.50 fall = 1.10 total deduction |