Question | Answer |
What are the color of the runway markings and runway hold lines | White runway markings and yellow runway hold lines |
____ are the portion of the airfield where aircraft or helicopters are parked before or between flights, and for servicing and maintenance | Aprons |
Which of the following is required when parking a vehicle at the side of any aircraft | Both A and B : vehicle must be clear of wingtips and vehicle must be visible to personnel in the cockpit |
Prior to entering or crossing a runway drivers will____ | Stop at the runway hold line, contact the tower via two-way radio and ask for permission to enter or cross |
The speed limit (max) when driving a general purpose vehicle within 25 ft of a parked aircraft is | 5 MpH |
What is the speed limit for a designated traffic lane within 200 ft of a designated parking area | 15 mph |
When are vehicles responding to red ball incidents allowed to exceed speed limits? | They are not allowed to exceed limits |
Where would this sign be located
[4-22]
(Red sign with white letter) | At the bar holdline for Runway 4-22 |
Pick correct statement | Runway numbers represent |
Crossing the runway hold lines and entering a runway without ATC approval will result in | All the above |
What is depicted below and what must a driver do when approaching it | Instrument hold line |
Which of the following statements are true for chocking parked vehicles on the airfield | Both a and b |
When parking a vehicle with a manual transmission in close proximity to an aircraft what gear is the transmission left in? | Reverse |
Which of the following actions are required when parking a vehicle in the airfield | All the above |
When a n aircrafts engines are being operated, vehicles will not be parked less than ____/____ of an aircraft | 25 Ft in front / 200 fr rear |
A flashing red light from the control tower means___ | Clear active runway |
A flashing green light and white light gun signal form the control tower cab means | General warning |
What must an operator do when approaching an active runway | Stop: contact tower to ask permission to cross runway |
Personnel operating within the controlled movement area will have two way radio contact with the control tower or___ | Have an escort with two way radio contact |
When approaching and aircraft at night vehicle operators should do which of the following | Turn off headlights and leave parking lights on |
Excerpt when an aircraft is being serviced, loaded or unloaded vehicles should not be driven within ___ ft of the aircraft | 10 ft |
When entering the airfield, vehicle operators must perform which of the following | All the above |
What are the leading causes of runway incursions | All the above |
Before entering the controller area l, vehicle operators must do which of the following | All the above |
All vehicles must approach parked aircraft | With drivers side of vehicle toward aircraft |
Which is a correct statement concerning communications | All the above |
When communicating with the tower, which communication is correct | Tower, maintenance one at taxiway alpha, request permission to cross runway 12 |
If a portion of the control tower transmission is garbled or stepped on what do you do | Ask them to repeat |
During inclement whether or at night what must a vehicle temp parked on any part of the aircraft apron do with their vehicle lights | Turn on flashers |