click below
click below
Normal Size Small Size show me how
Intro to metals rev
| Question | Answer |
|---|---|
| An example of an unsafe condition on a job site is | Inadequate lighting in a stairway. |
| Companies with strong safety cultures usually have lower | turnover |
| When welding, what color is the oxygen hose? | Green |
| Employers are required to report fatalities and catastrophes to OSHA within how many hours? | 8 |
| Benching systems cannot be used in what type of soil | Type C Soil |
| The D-ring or support point on a safety harness should be placed where? | Between your shoulder blades. |
| What must be included with every shipment of a hazardous substance and make available to workers on the job site? | MSDS |
| A measure of probability, consequences, and exposure related to an event is referred to as | Risk |
| When stepping off a ladder onto a platform or roof, the top of the ladder should extend above the point where the ladder touches the platform or roof by at least how many feet? | 3 feet |
| A worker who has been discriminated against for asserting his or her OSHA rights has the right to file a complaint within how many days? | 30 days |
| When gas welding or burning, welders are required to wear tinted goggles or welding hoods with filter of not less than what shade? | No. 4 |
| Your personal fall arrest system should be inspected monthly by this type of person | Competent person |
| The major goal of good house keeping at a work site is to do what? | Prevent accidents |
| The highest safe standing level on an extension ladder is what rung from the top? | Fourth |
| With every power tool, you should use an assured ground program or a | GFCI |
| Prolonged exposure to asbestos can cause lung cancer, asbestosis, and also this | Mesothelioma |
| When performing overhead work on a scaffolding, what protective measures must be taken to prevent falling objects from striking the person below? | Toeboards, debris nets, or canopies |
| A system that protects workers from hazardous energy while they work with machines and equipment is referred to as this | Lock out/Tag out |
| When everyone in the company understands the value or a safe work environment, this is created | A safety culture |
| The primary purpose of a machine guard on a tool is to do what | Protect the worker from rotating parts. |