Mammography2 Matching
| Most AEC circuitry in modern mammographic imaging has at least three detectors. Three or more detectors are recommended because |
| Multiple detectors allow for maximum variations in breast size and tissue density. |
| films that involve exposure to the patient |
| Hardcopy viewing of the digital imaging describes |
| the image that is sent for interpretation |
| Before processing the sensitometric strip each day, the mammographer should |
| check the developer temperature |
| In mammography, selecting extremely low kVp values |
| increases contrast but increases patient dose |
| Which of the following mammographic quality control tests is performed monthly? |
| The chest wall edge of the compression paddle should be aligned just beyond the chest wall edge of the IR to |
| avoid projecting the chest wall edge of the paddle on the mammogram. |
| In digital mammography, both the film and cassette can be replaced by |
| a detector and electronic system |
| In viewing phantom image, which of the following viewing conditions need not apply? |
| using the same film emulsion batch |
| In the darkroom fog test, the optical density difference between fogged and unfogged areas of the film should not exceed |
0:00
