Radiology Physics Word Scramble
|
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
| Question | Answer |
| What are the three basic parts of the x-ray imaging system | Operating Console, X-Ray Tube and High Voltage Generator |
| A line compensator ensures that what remains constantly delivered to the imaging system | Voltage |
| What two separate circuits is the autotransformer used to supply power to | High voltage and filament circuits |
| The process of heating the x-ray tube filament so that electrons can be boiled off is know as what | thermionic Emission |
| Filaments normally operate at currents of how many amps | 3 to 6 |
| Examination tables are made of what strong, radiolucent material | Carbon Fiber |
| The x-ray tube current is controlled by what circuit | Filament |
| If an autotransformer moves from 1500 windings to 800 windings, what type of transformer is it | Step-Down |
| What are the three basic parts of the high-voltage generator | High Voltage Transformer, Filament Transformer and Rectifiers |
| Rectification is accomplished with the use of what | Diodes |
| Does half-wave rectification require half the exposure time as full-wave rectification | No |
| Is the x-ray tube a type of diode | Yes |
| A three-phase twelve-pulse power has how much voltage ripple | 4% |
| A three-phase, six-pulse power has how much voltage ripple | 14% |
| A high-frequency generator has how much voltage ripple | 1% |
| A single-phase power has how much voltage ripple | 100% |
| What are the five types of exposure timers | Manual, Mechanical, Synchronous, AEC and Electronic |
| Which exposure timer uses an ionization chamber to terminate exposure | AEC |
| Name the parts of the x-ray tube | Supporting wires, Focusing Cup, Filament, Window, Rotating Anode, Stater Coils, Target, Roter and Glass Envelope |
| What device is used to check exposure timers for accuracy | Solid State Radiation Detector |
| Which exposure timer is based on the frequency of AC supplied to the imaging system | Synchronous |
| Using a single-phase power, half-wave rectification results in how many x-ray pulses each second | 60 |
| Using single-phase power, full wave rectification results in how many x-ray pulses each second | 120 |
| Thermionic emission produces a cloud of electrons around the filament known as what | Space Charge |
| The main advantage of a rotating anode over a stationary anode is what | Better Heat Distribution |
| Once the filament current is high enough for thermionic emission, a small/large rise in filament current results in a small/large rise in tube current | Small, Large |
| When imaging x-table lateral spines, one should use which focal spot | Large |
| The anode serves three functions in an x-ray tube, what are they | Electrical Conductor, Mechanical Support and Thermal Dissipator |
| X-ray tubes in mammography have targets made of either what two materials | Rhodium and Molybdenum |
| The anode of a high-capacity tube rotates at how many RPM's | 3400 and 10000 rpm |
| The rotating anode is powered by what | Electromagnetic Induction Motor |
| What are the characteristics that make tungsten a good selection for target material | High atomic number, Thermal conductivity and High melting point |
| Leakage radiation must be less than how many mR/hr at 1 meter | 100 |
| The protective housing may contain oil which serves two functions, what are they | Insulator and Thermal Cushion |
| The x-ray tube enclosure may be made of what two materials | Glass(Pyrex) or Metal |
| What is the melting point of tungsten | 3410oC |
| What element is added to tungsten to increase the efficiency of the filament | Thorium |
| The cathode is the negative side of the x-ray tube and contains what two primary parts | Focusing Cup and Filament |
| X-rays emitted through the window are called what | Useful or Primary Beam |
| The focusing cup sustains what type of charge | Negative |
| The x-ray tube is: a vacuum tube, a type of transistor, or a diode | A vacuum tube and a diode |
| Target angles may vary from what to what degrees | 5 to 20 |
| The heel effect results in less radiation on which side of the x-ray beam | Anode |
| Should one use the maximum technique in order to warm a cold anode | No |
| What are two causes of tube failure | Too much technique on a cold tube(overheats) and arching effect due to vaporized tungsten |
| The line-focus principle results in which focal spot size much less than which focal spot size | Effective focal spot/Actual Focal Spot |
| The smaller the anode angle, the heel effect becomes what | Greater |
| What are the reasons that off-focus radiation is undesirable | Extends the size of the focal spot, increases skin dose modestly and reduces image contrast |
| Most of the causes of x-ray tube failure are related to what | Thermal Capacity |
| A magnetic field is created any time what type of particle is in motion | A charge particle |
| What is the purpose of an electric generator | To convert mechanical energy into electricity |
| What is the purpose of an electric motor | To convert electricity into mechanical energy |
| A current carrying coil of wire is known as what | Selenoid |
| Placing an iron core into a current carrying coil of wire would turn the device into what | Electromagnet |
| An electric current is induced in a circuit if some part of that circuit is in what type of magnetic field | Changing |
| What are the four factors of Faraday's law | The velocity of the magnetic field to the conductor, the magnetic field strength, the angle of the conductor to the magnetic field and the number of turns in the coil. |
| The autotransformer operates on what principle | Self-induction |
| A regular step-up or step-down transformer operates on what principle | Mutual Induction |
| What are the three main causes of transformer inefficiency | Resistance, Hysteresis and eddy-currents |
| Transformers require what type of voltage to operate, while the x-ray tubes must be supplied with this type of voltage | AC/DC |
| Why is it important that the production of x-rays take place in a vacuum | Air can cause electrons to scatter, reducing the efficiency of the beam production |
| What causes an "open filament" | Over use of the filament causes vaporization of the tungsten |
| How much more area does a rotating anode provide to interact with the electron beam than a stationary anode | 1000 times |
| Tube current is adjusted by controlling what circuit | Filament |
| What are the SI units of magnetic field strength | Tesla |
| List three types of transformers | Closed-Core, Autotransformer and shell-type |
| A step-up transformer results in an increase in what | Voltage |
| A step-down transformer results in an increase in what | Current |
| Electron target interactions result in the conversion of electron kinetic energy into what two types of energy | Thermal(Infared Radiation) and Electromagnetic (X-rays) |
| The production of heat in the anode increases directly with increasing x-ray tube what | Voltage and Current |
| Using three-phase power is equivalent to a what percent increase in kVp over single phase equipment | 12% |
| Using high-frequency power is equivalent to a what percent increase in kVp over single phase equipment | 16% |
| What effect does added filtration have on the x-ray beam | Removes low energy rays, and "hardens" the beam (increases quality while decreasing quantity) |
| Only what shell x-rays of tungsten are useful for imaging | k-shell |
| The doubling of mAs causes a doubling of what striking the target, and consequently doubles the number of what emitted | electrons/x-rays |
| The roentgen is a measure of the number of what produced in air by a quantity of x-rays | Ion pairs |
| This is just a measure of the total number of electrons that travel from cathode to anode to produce x-rays | CurrentxSeconds(mAs) |
| The four factors affecting quantity are what | kVp, mAs, Filtration and Distance |
| X-ray quality is also known as what | Penetration |
| Doubling the optical density on a radiograph using kVp alone requires an increase of what percent | 15% |
| Two factors that affect x-ray quality are what | kVp and filtration |
| Rectification | The Conversion of AC power into DC power |
| Leakage Radiation | The radiation that escapes from the tube housing |
| Off-Focus Radiation | 3. Electrons that bounce off of the focal spot and strike other areas of the target causing x-rays to be produced outside of the focal spot. |
| Thermionic Emission | The "boiling off" of electrons from the filament |
| Half-Value Layer | The amount of absorbing material required to reduce the intensity of the beam by one half. |
| Proton | A positively charged particle located inside the nucleus of an atom. It also defines the atomic number of an element. |
| Neutron | A particle located inside the nucleus of an atom that has no charge. |
| Electron | A small particle that usually orbits around the nucleus of an atom and has a negative charge |
| Atomic Number | The total number of protons an element has, which consequently defines what the chemical element is. |
| Ionization | The release of an electron by an orbiting shell |
| Rem | "Radiation Equivalent Man" the radiation amount absorbed by a person through their occupation |
| Rad | "Radiation absorbed dose" the absorbed amount of radiation by any object |
| Roentgen | The amount of radiation that is traveling through the air |
| Radiation | The transfer of energy by the ionization of atoms |
| Radioactivity | the emission of particles or energy from an atom |
| Alpha particle | Consists of two neutrons and two protons from the nucleus of an atom |
| Beta particle | The emission of an electron from the nucleus that converts a neutron into a proton |
| Photon | A packet of electromagnetic energy |
| Properties of a photon | Frequency, wavelength, amplitude and velocity |
| Attenuation | Reduction in intensity resulting from scattering and absorption |
| Coherent Scattering | Results in a change in direction without a change in energy. AKA classical scattering and occurs below 10 keV |
| Compton Scattering | The source of most occupational radiation exposure. An outer shell electron is struck and ejected (compton electron). The x-ray continues in a different direction with less energy, and it produces fog. |
| Photoelectric Effect | An inner orbital electron is struck and ejected, ionizing the atom. The energy is completely absorbed. Responsible for characteristic diagnostic image. |
| Pair Production | Creates two electrons, + and -. Energy is absorbed by the nucleus, but it must be at least 1.02 MeV |
| Photodisintegration | Only occurs above 10MeV. Energy is absorbed by the nucleus which emits a nuclear fragmant |
| Insulator | Any material that does not allow electron flow |
| Superconductor | A material that exhibits no resistance below a critical temperature |
| Semiconductor | A material that under some conditions behaves as an insulator, and in other conditions, behaves as a conductor |
| Conductor | Any substance through which electrons flow easily |
| Resistance | Anything that hinders or opposes the electric current flow of charge particles |
| Radiopaque | A substance in which electromagnetic waves cannot travel through |
| Radiolucent | A substance in which electromagnetic waves can travel through |
| Find the number of electrons in a shell | 2n^2 |
| Find frequency or wavelength | C= (wavelength)x(frquency) |
| Inverse square law | (I1)(D1)^2 = (I2)(D2)^2 |
| What is the smallest particle that has all the properties of an element | Atom |
| What is the maximum number of electrons that may be found in the outermost shell of any atom | 8 |
| A proton and neutron are how much larger than an electron | 2000 times |
| Who discovered x-rays and when | Wilhelm Roentgen, November 8th, 1895 |
| What is the largest source of natural environmental radiation | Radon |
| What is the largest source of man-made ionizing radiation | Diagnostic |
| What are the fundamental building blocks of matter | Atoms and Molecules |
| When x-rays were first discovered, what was their source | Crooks Tube |
| What are the types of energy | Potential, Kinetic, Chemical, Electrical, Thermal, Nuclear and Electromagnetic |
| What does ALARA stand for | As Low As Reasonably Achievable |
| What did the Coolidge tube allow for the separation of | Voltage and Current |
| What are three primary radiation protection devices | Filtration, Shielding and Collimation |
| What are the two categories of ionizing radiation | Electromagnetic (x and gamma) and Particulate (alpha and beta) |
| What is the smallest particle that has all the properties of a compound | Molecule |
| What are two factors that decrease the affinity of an electron to its element? How do they effect it? | The larger the atom the less the affinity and the further away an electron's orbit is, the less the affinity |
| At what speed does all electromagnetic radiation travel | 3.0 x 10^8 |
| What two natures does electromagnetic energy behave in | Wave and Particle |
| Of these natures, which does it tend to behave more like | Particle |
| How are frequency and wavelength related | Inversely proportional |
| What is the smallest unit of negative electric charge | Electron |
| If two negatively charged objects are brought near to each other will they be attracted or repelled | Repelled |
| If an object gains an electron does it become positively or negatively electrified | Negatively |
| Can protons move freely from one atom to another | No |
| What are the three ways electrification can be created | Induction, Friction and Contact |
| What is the electric charge of a coulomb | 6.3 x 10^18 |
| Do electric charges have potential energy | Yes |
| What are the 3 main factors that characterize a simple circuit and their unit of measurement | Voltage (Volts), Current (Amps) and Resistance (Ohms) |
| How is the volt meter connected to a circuit | Parallel |
| How is an amp meter connected to a circuit | In Series |
| What type of circuit does voltage remain constant | Series |
| What are the four factors that influence the resistance of a conductor | Cross sectional Area, Material Type, length and temperature |
| What are three devices that help protect against or minimize exposure to radiation | Intensifying screens, filtration and lead shields |
| What is the difference between x-rays and gamma rays | X-rays are emitted from the cloud of electrons, gamma rays are emitted from the nucleus. |
Created by:
1430605592
Popular Radiology sets