Contrast Word Scramble
|
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
| Question | Answer |
| ______ is the difference between adjacent densities. | contrast |
| The term ___________ describes the concept of contrast as it is displayed on a soft-copy monitor for digital images. | dynamic range |
| The term __________ accurately describes the digital processing that produces changes in the range of density/brightness. | window width |
| Any change in overall ____ will affect contrast. | density |
| _____ contrast provides more diagnostic information, if it is still in visible range. | Low |
| High contrast is also known as: | Few shades of gray Increased contrast Low kVp Short scale contrast Short dynamic range/window width |
| Low contrast is also known as: | Many shades of gray Decreased contrast High kVp Long scale contrast Large dynamic range/window width |
| ___________ is the number of useful visible densities or shades of gray. | Scale of contrast |
| _____ is the total range of density values recorded by the image receptor. | Physical contrast |
| ______ is the total range of density values that can be perceived by the human eye. | Visible contrast |
| Compression or expansion of densities can be accomplished by the following: | change in the film's Dlog E curve, adjustments in kVp or by the use of window width. |
| ___________ is the range of densities that the film is capable of recording. | Film contrast |
| Film contrast depends on four factors: | intensifying screens film density D log E curve Processing |
| Intensifying screens create an inherently _________ image. | higher contrast |
| Film contrast also changes with changes in ______. | film density |
| Excessive or inadequate film density will _____ contrast. (especially true in the toe and shoulder regions of the D log E curve) | decrease |
| Where on the D log E curve is contrast maximized? | straight line portion |
| As the slope of the curve becomes steeper, contrast is _______. | increased |
| Increased developer temperature, time, and replenishment cause increased fog and _________. | decreased contrast |
| __________ is the range of differences in the intensity of the x-ray beam after it has been attenuated by the subject. | subject contrast |
| ______ is the primary controller of subject contrast. | Kilovoltage (kVp) |
| An increase in kVp will lead to a wider range of exposures on the IR, which results in an overall _____ contrast. | lower |
| As long as the kVp is adequate to penetrate the part being examined, low kVp will produce _____ subject contrast. | high |
| High kVp produces a _______ range of relative exposures, while low kVp will produce an _______ range of relative exposures. | compressed; expanded |
| As kVp increases, the percentage of _________ increases. | Compton interactions |
| As a result of the increase in the amount of scatter reaching the IR, contrast is _________. | decreased |
| Fog can be caused by subjecting film to: | heat low level ionizing radiation chemical fumes |
| Any factor that results in an increase in fog will cause a _______ in contrast. | decrease |
| When the difference between adjacent thicknesses is great, subject contrast is ______; when little difference exists in the thickness of adjacent body parts, subject contrast is _____. | increased; decreased |
| When the amount of overall thickness of a body part increases = ____ scatter and ____ subject contrast. | increased; decreased |
| A decrease in overall body part thickness/field size = _______ subject contrast | increased |
| Materials with a higher Z# absorbs a _______% of the x-ray beam than low Z# materials. | greater |
| The presence of more electrons will enable _____ interactions to occur. | more |
| When the difference between the average Z# of adjacent tissues is great, subject contrast is ________. (and vice versa) | increased |
| Contrast media _______ subject contrast by introducing greater differences in Z# variations than those that exist naturally. | increase |
| When the difference between the densities of adjacent tissues is great, subject contrast is _______.(and vice versa) | increased |
| The major consideration in evaluating visible contrast is verification that a proper range of ______ is visible in the area of interest. | densities |
| A _______ is tool to help focus on the contrast in a certain area. | contrast mask |
| A visible change in contrast will not be perceived until kVp is changed by _______ | 4-12%. |
| There is no reason to repeat an exposure for contrast reasons unless a _______ change is made. | 4-5% |
| The rule for contrast changes is to make adjustments of _________ percent. | 15 or 8 |
| Contrast evaluation can be made only when sufficient ______ exists to permit the range of contrast to be seen. | density |
| Photoelectric effect interactions ______ as kVp decreases. | increases |
| A given kVp for a 3 phase generator will produce a _____ contrast than a single pase unit. | lower |
| kVp affects contrast and has the most _____ effect on the image. | direct |
| Influencing factors has a ______ effect on the image. | less direct |
| _____ is the controlling factor of contrast. | kVp |
| As kVp increases, contrast _____. (and vice versa) | decreases |
| kVp increases amount of radiation fog, which will in result _____ contrast. | decrease |
| When a film is either over or underexposed, the contrast is _______. | decreased |
| What effect do focal spot size and anode heel effect have on contrast? | none |
| Removing scatter from the image will _____ contrast. | increase |
| An increase in filtration will ______ contrast. | decrease |
| Beam restriction will reduce the amount of scatter and therefore ______ contrast. | increase |
| As the anatomical part size increases, the amount of scatter created by the part also increases, which will result in a _____ in contrast. | decrease |
| High Z#'s will cause more photoelectric absorption, resulting in _______ contrast. | increased |
| Grids improve _____ by removing scatter before it reaches the IR. | contrast |
| Higher ratio grids remove more scatter - and will result in a ____ contrast image. | higher |
| _____ is the amount of shades of gray a pixel can record. | Bit depth |
| The larger the bit depth the ____ shades of gray the can be recorded. | more |
| Decreasing film development time, temp, or replenishmen rate from the optimal range will ____ contrast. | decrease |
Created by:
teachable monkeys
Popular Radiology sets