Help
Options
Didn't know it?
click below
click below
Knew it?
click below
click below
Don't Know
Remaining cards (0)
Know
retry
shuffle
restart
0:00
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
3E051 Set C Book 1
| Question | Answer |
|---|---|
| The most important thing to keep in mind during readiness training is | that the reason for our existance is to do our mission |
| Prime Base Engineer Emergency Force was created to | respond to worldwide contingency taskings |
| How do GeoBase services provide "fused installation picture?" | Combining Common Installation picture and Mission Data Set layers |
| The present Civil Engineering squadron format was adapted to | streamline functions and responsibilities |
| The Civil Engineering squadron commander is normally referred to as the | base civil engineer |
| Real property accounting is the responsibility of which flight? | resources |
| Which is the largest flight in Civil Engineering in terms of personnel? | Operations |
| A zone manager documents minor maintenance and repair work on | AF form 1219, BCE Multi-Craft Job Order |
| The largest single element under the operations flight is | heavy repair |
| Who is in the best position to maintain good rapport with Civil Engineering's customers | the workers |
| One definition of urgent-type work is work that | eliminates fire, health, and safety hazards |
| The type of work request in which labor or materials or both are "donated" by the requestor is | self-help |
| Initially determining whether a work request (AF Form 332) could have an environmental impact is done by the | zone representative during the review process |
| The accomplishment of self-help work orders is ultimately the responsibility of the | base civil engineer |
| Who inspects work for quality and completion, and furnishes signed AF Form 327 to maintenance Engineering section? | Work center supervisor |
| Which of the following is not a good supply discipline rule? | Over purchase supplies to keep more than adequate stock |
| The first four digits of a national stock number identify the | stock class of the item |
| Which of the following forms limit your request to 12 separate items? | AF Form 1445, Materials and Equiptment list |
| Which of the following forms is used to order material not previously issues a stock number? | DD Form 1348-6, DOD Single Line Item Requisition System Document |
| Materials used on a routine basis, such as screws, nuts, bolts, or lumber, are kept in the | bench stock area |
| Which of the following is not a function of Logistics? | Updating CE customers regarding material delivery dates for certain jobs |
| The main objective of the Air Force warranty/gaurantee program is to | make sure of the purchase of high-quality products and prolong their productive life |
| How is warranted/gauranteed Air Force equipment identified? | by attaching an Optional Form 274, Equipment Warranty, to the equipment |
| The purpose of the reoccuring work program is to | extend the life of Air Force facilities and equipment |
| Reoccuring work program schedules are printed on a | weekly basis |
| Which of the following is given to the journeyman when reoccuring work program work is done? | The maintenance action sheet |
| Who selects and monitors the performance of the reoccuring work program's program managers in the electrical, mechanical, and structural disciplines? | the maintenance engineering foreman |
| Task intervals on a Maintenance Action Sheet indicate | how frequently a task occurs |
| The scheduling concept is a twofold operation consisting of filling out the | AF Form 561 (weekly schedule) and AF Form 1734 (daily schedule) |
| The main difference between exception time accounting (ETA) and actual time accouting (ATA) shops is that | ATA shops are primarily in Operations flight and report their hours weekly |
| Which statement is true concerning direct and indirect labor utilization codes? | Direct LUCs show "productive" labor hours, such as Prime BEEF |
| Who develops the weekly work schedule (AF Form 561)? | supervisor |
| What constitutes a schedule deviation from the weekly work schedule? | failure to start or complete a job as planned |
| Who releases work to workers and logs the work on the daily work schedule (AF Form 1734)? | scheduler |
| The purpose of the daily work schedule (AF Form 1734) is to show the status of each job and the | location of each worker |
| Due to system transistions, what CE Management computer software packages may be used within the organizations? | IWIMS and ACES |
| What type of files are maintained in IWIMS data files? | All raw data or information |
| The most important technique you can employ when planning jobs is to | visit the job site to get a better understanding of the magnitude of the job |
| Listing the order of work accomplishment by specific trade is called | craft phasing |
| What are the two main types of Air Force publications? | departmental and field |
| Which type of publication applies to a minimum of two major commands? | departmental |
| Air Force publications were renamed and renumbered to | ease the process of information retrieval |
| Which type of Air Force publication is identified by the name of the base followed by the publication number (SAFB Instruction 32-7040)? | Installation |
| Which type of nondirective publication is informational and serves to guide, point out, or otherwise facilitate reference to other publications? | Air Force indexes |
| Air Force "Aim High" recruitment posters are a good example of Air Force | temporary visual aids |
| The series number for civil engineering publications is | 32-XXXX |
| How many methods does the Master Catalog offer for locating publications? | 4 |
| When a commercial technical publication is filed with regular TOs, how is it identified? | an identifying title sheet is filed in from of the commercial publication |
| How do you file commercial publications that are purchase locally? | on a designated shelf file, in some logical order |
| Engineering technical letters apply to | all facilities except medical and family housing |
| Which section of the Opercation and Service Instructions Manual contains instructions for uncrating, installing and preparing equipment for initial operations? | section 3 |
| Which setion of the Operation and Service Instructions Manual contains step-by-step instructions for starting, operating, and stopping equipment? | section 4 |
| Which time compliance technical order requires you to discontinue use of equipment until prescribes maintenance work is completed? | immediate action TCTOs |
| The time compliance technical order that must be issued if the risk involved is tolerable only within definite time limits is the | urgent action TCTO |
| What is the first number of all technical order indexes? | zero (0) |
| Which technical order improvement recommendation requires action within 40 days of its receipt? | urgent |
| What type of technical order improvement recommendation is submitted if prescribed by maintenance procedures reduce the operational life of equipment? | Routine |
| Some sort of training documentation must be kept on airmen in the grades of | AB through SMSgt |
| Maintaining an AF Form 623, Individual Training Record, is mandatory for airmen in the grades of | AB through TSgt |
| The current program used to record training in the field is known as the | Career Field Education and Training Plan |
| Newcomers who already possess training records from another base are evaluated | only for previously certified tasks done at their present base |
| Certifying officials for each section are assigned by the | unit commander |
| Who evaluates the trainee and verifies that he/she has completed all upgrade training requirements? | certifying official |
| What is the most common training medium of the CerTest program? | video |
| The purpose of the Air Force classification system is to | identify job taskings and match them to an individual's abilities |
| The job describtion gives a summary of duties and responsibilities for all personnel in a specific | AFSC |
| Suffixes attached to an Air Force specialty code (AFSC) are used mainly | to designate special experience with one major equipment item |
| The best descriptor of "career advancement" in the Air Force is | having skill levels commensurate with your grade |
| In any specialty, what is a 1-level considered in the Air Force? | unskilled |
| Which training responsibility is most important during skill-level upgrade training? | budget time on and off duty for CDC completion |
| The first person to talk to if you do not understand your training plan is | your supervisor |
| Placing safety suggestions on the bulletin board and passing safety literature to each worker are examples of which type of mishap prevention method? | education and training |
| How often will supervisors review safety lesson plans? | annually |
| What computer code reflects supervisor safety training completion? | code "Q" |
| Information showing the location of installed distribution equipment should be kept | on a distribution map in the shop |
| System problems, such as outages, surges, or low voltages, are recorded on the | power outage log |
| Who is responsible for planning jobs that are to be done "hot"? | The electrical systems supervisor |
| How can supervisor ensure crewmember understands the requirements presented during a tailgate meeting? | have personnel repeat procedures |
| Which Air Force form is used to record all blocking and tagging actions done on primary electrical circuits on Air Force installations? | AF Form 269, Electrical Facilities Safe Clearance |
| Who is responsible for issuing a safe clearance? | Superintendent |
| The signature of the electrical supervisor in the "Released By" block of the safe clearance for certifies that | all personnel and temporary grounds are clear and all lines and equipment are ready for service |
| From who/ where must you get radio clearance before entering the active runway? | control tower |
| What is the first step you should take in a pole-top rescue? | Evaluate the situation |
| When rescuing a person from a manhole, your primary concern should be | your own safety |
| Which of these should you use with the manhole guard when using the two-person method of manhole rescue? | windlass handcrank |
| When setting up the bucket truck for rescue, where should you place the strap, and how far from the bucket should it be? | the upper boom; 10 feet |
| Most findings of No Significant Impact must not exceed | two typewritten pages |
| To raise state and local awareness of the potential for accidents involving hazardous substances, the Environmental Protection Agency established the | Chemical Emergency Preparedness Program |
| By law, in the case of the release of predetermined amounts of hazardous chemicals, teh facility must notify the community and the | Local Emergency Planning Committee and the State Emergency Response Committee |
| To whom does the assessment team provide an in-brief at the start on the Environmental Compliance Assessment and Management Program visit? | Environmental Protection Committee |
| Who is responsible for ensuring that Resource Conservation and Recovery Act (RCRA) requirements for the use of a Hazardous Waste Management Program are complied with? | Installation commander |
| What is the maximum amount of time hazardous waste can be stored at an accumulation point before it is turned over to the Defense Reutilization and Marketing Office? | 90 days |
| How does asbestos usually enter the body? | By being inhaled |
| When are you most likely to encounter asbestos? | during renovation of old structures |
| Which of the following is not considered as a mahor source of lead exposure in children? | Leaded gasoline engine emissions |
| The primary purposes of a Lead Toxicity Investigation Team are to identify the source of lead exposure to an affected patient and provide | hazard evaluation and recommend potential corrective action |
| What symptom appears when an individual has ahd prolonged skin contact with polychlorinated biphenyl? | chloracne |
| When medical aid is not immediately available, what first aid should you give to an individual who has swallowed polychlorinated biphenyl? | give the victim large amounts of salt water |
| A transformer that contains polychlorinated biphenyl (PCB) in greater concentrations than 500 parts per million is considered | PCB electrical equipment |
| If the service equipment to a food storage facility is found to be PCB-filled, how often thereafter must you inspect this equipment? | weekly |
Created by:
melissafish
Popular Military sets