RADT 456 E.O. & Q.C. Word Scramble
|
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
| Question | Answer |
| Bremsstrahlung radiation make up what percent of the x-ray beam? | 70%-90% pg. 437 |
| What percent of the x-ray beam does characteristic radiation make up? | 10%-30% pg. 437 |
| Compton scatter ejects an _________ ________ electron. | outer shell pg. 440 |
| The number of cycles per unit of time is the definition of __________. | frequency pg. 443 |
| The unit of measurement for frequency is _________. | Hertz (Hz) pg. 444 |
| Which scientist observed that a magnetic field with induce an electric current? | Faraday pg. 445 |
| A singe-phase, full-wave rectified waveform has a ___ % voltage ripple. | 100 pg. 448 |
| A three-phase/six-pulse rectification has a ___ % voltage ripple. | 13 pg. 449 |
| A three-phase/twelve pulse rectification has a ___ % voltage ripple. | 4 pg. 449 |
| The focal track of the anode is made up of what kind of material? | Tungsten and rhenium alloy pg. 451 |
| For a single phase unit, heat units can be determined by the equation? | mA X s X kV = HU pg. 454 |
| Causes of x-ray tube failure are _________, ________, ________, and _________. | vaporized tungsten, pitted anode, cracked anode, and gassy tube. pg. 455-457 |
| This part of the x-ray circuit functions to automatically adjust for any fluctuations in incoming voltage supply and is located on the primary side. | Line voltage compensator pg. 458 |
| This part of the x-ray circuit is a system of diodes that is located between the secondary coil of the high-voltage transformer and the x-ray tube. | Rectifiers pg. 461 |
| The range of grays a particular digital system is capable of resolving/demonstrating. | Contrast Resolution pg. 466 |
| The ratio of light photons at the output phosphor to the number at the input phosphor. | Flux gain pg. 482 |
| The ratio of the diameters of the input and output screens squared refers to _________. | Minification gain pg. 482 |
| Diminished resolution and contrast at the periphery. | Vignetting pg. 483 |
| The thickness of any absorber and the recording that will reduce x-ray beam intensity to one-half its original value. | Half-Value Layer pg. 497 |
| Test performed annually that evaluates the consistency of x-ray tube output and should not vary more than 5%. | Reproducibility pg. 497 |
Created by:
haybay22
Popular Radiology sets