RADT 456 Equip and Q Word Scramble
|
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
| Question | Answer |
| What is the purpose of the filament current? | Supplying low-voltage current to the filament of the x-ray tube. (Saia, Radiology Prep: p. 455) |
| What causes pitting or many small surface melts of the anode focal track? | Repeated and frequent overloading (Saia, Lange Q&A: p. 280) |
| Congruence of the x-ray beam with the light field is tested by? | Radiopaque objects (Saia, Lange Q&A: p. 281) |
| Which of the following is/are components of the secondary side of the x-ray circuit: 1. Rectification system 2. Autotransformer 3. kV meter | (1) Rectification system (Saia, Lange Q&A: p. 282) |
| What device is used to convert electrical energy to mechanical energy? | Motor (Saia, Lange Q&A: p. 301) |
| What converts mechanical energy to electrical energy? | Generator (Saia, Lange Q&A: p. 301) |
| What is the primary function of the phototimer? | Terminate x-ray exposure once the IR is correctly exposed. (Saia, Lange Q&A: p. 282, 301) |
| What is the voltage ripple of three phase, six pulse? | 13% (Saia, Lange Q&A: p. 283, 302) |
| Which of the following will improve the spatial resolution of image-intensified images: 1. Very thing coating of cesium iodide 2. smaller diameter input screen 3. increased total brightness gain? | 1&2(Saia, Lange Q&A: p. 283, 202) |
| What does a synchronous spinning top test look like? | Solid arc, with the angle representative of the exposure time (Saia, Lange Q&A: p. 284, 304) |
| Star and Wye configurations are related to: | Three phase transformers (Saia, Lange Q&A: p. 284, 304) |
| Automatic brightness control is used to adjust: | kV and mA (Saia, Lange Q&A: p. 284, 304) |
| What is the device that directs the light emitted from the image intensifier to various viewing and imaging apparatus? | Beam Splitter (Saia, Lange Q&A: p. 285, 305) |
| How often should kV settings be tested and how accurate should it be? | Annually, +/- 4 kV (Saia, Lange Q&A: p. 286, 307) |
| A spinning top device can be used to evaluate: 1. timer accuracy 2. rectifier failure 3. effect of kV on contrast? | 1&2 (Saia, Lange Q&A: p. 287, 308 |
| Total brightness gain of an image intensifier is the product of: 1. flux gain 2. minification gain 3. focusing gain? | 1 (flux gain) & 2 (minification gain) (Saia, Lange Q&A: p. 287, 208) |
| Device used to change alternating currecnt to unidirectional current is? | Solid state diode (Saia, Lange Q&A: p. 287, 309) |
| Deposited vaporized tungsten on inner surface of x-ray tube glass window does what to the tube/ beam? | Adds filtration to window (Saia, Lange Q&A: p. 288, 309) |
| What device is used to control voltage by varying resistance? | Rheostat (Saia, Lange Q&A: p. 292, 314) |
| What is rheostate? | Variable resistor that is used to change voltage or current values. It is found in the filament circuit. (Saia, Lange Q&A: p. 292, 314) |
Created by:
smenke
Popular Radiology sets