click below
click below
Normal Size Small Size show me how
1.1
Term | Definition | Examples |
---|---|---|
Breadboard | A circuit board for wiring temporary circuits, usually used for prototypes or laboratory work. | |
Conventional Current | The direction of current flow associated with positive charge in motion. The current flow direction is from a positive to negative potential, which is in the opposite direction of electric flow. | |
Current | A movement of electrical charges around a closed path or circuit. | |
Digital | A way of representing a physical quantity by a series of binary numbers. A digital representation can have only specific discrete values. | |
Digital Multi- meter (DMM) | A piece of test equipment used to measure voltage, current, and resistance in an electronic circuit. | |
Engineering Notation | A floating point system in which numbers are expressed as products consisting of a number greater than one multiplied by an appropriate power of ten that is some multiple of three. | |
Kirchhoff's Current Law (KCL) | The algebraic sum of all current into and out of any branch point in a circuit must equal zero. | |
Kirchhoff's Voltage Law (KVL) | The algebraic sum of all voltages around any closed path must equal zero. | |
LED | Light-emitting diode. An electronic device that conducts current in one direction only and illuminates when it is conducting. | |
Ohm's | Unit of resistance. Value of one ohm allow current of one ampere with potential difference of one volt. | |
Parallel Circuit | In electric circuits, l=V/R. | |
Resistance | One that has two or more branches for separate current from one voltage source. | |
Resistor Color Code | Opposition to current. Unit is the ohm. | |
Scientific Notation | Coding system of colored stripes in a resistor to indicate the resistor’s value and tolerance. | |
Series Circuit | One that has only one path current. | |
SI Notation | Abbreviation of system international’ a system of practical units based on the meter, kilogram, second, ampere, kelvin, mole, and candela. | |
Solder | Metallic alloy of tin and lead that to join two metal surface. | |
Soldering | Processing of joining two metal surface to make an electronical contact by melting solder (usually tin and lead) across them. | |
Soldering Iron | Tool with an internal heating element used to heat surfaces being soldered to the point where the solder becomes molten. | |
Analog | A way of representing some physical quantity, such as temperature or velocity, by a proportional continuous voltage or current. Analog voltage or current can have any value within a defined range |